Chassis Four rack unit (4RU) chassis
Either 2 or 4 Intel® Xeon® E7-8800/4800 family processors
Two-CPU configurations require 2 power supplies
Four-CPU configurations require 4 power supplies
Chipset Intel® 7500 chipset and Intel 7510 scalable memory buffer
Memory Eight slots for memory riser boards. Each memory riser can hold up to 8 DIMMs, for a maximum DIMM population of 64 DIMMs.
Maximum memory capacity is 2 TB. This is accomplished with 64 DIMMs, consisting of 32 DIMM kits (2 32 GB matched DIMMs per kit) in a 4-CPU configuration.
USB Flash drive Optional 2 GB internal eUSB flash drives (up to 2) can be used as bootable drives
There are 10 PCIe expansion slots:
■ Slots 1 and 2: Gen 2x8, 3/4 length card, x24 hot-swappable connectors
■ Slots 3 and 4: Gen 2x4, 1/2 length card, x8 connectors
■ Slot 5: Gen 2x16, 3/4 length card, x16 connector
■ Slots 6 and 7: Gen 2x8, 3/4 length card, x8 hot-swappable connectors
■ Slot 8: Gen 1x4, 3/4 length card, x8 connector
■ Slot 9: Gen 1x4, 1/2 length card, x8 connector
■ Slot 10: Gen 2x4, 1/2 length card, x8 connector
CPU3 must be installed to support PCIe slots 5, 6, 7, 9, and 10. Legacy I/O devices like video cards are only supported on slots 1,2,3, 4 and 8
Factory-configured RAID support options:
■ RAID 0, 1, 5, 6, 10, 50, and 60 support for up to 12 SAS or SATA drives with either the optional LSI MegaRAID SAS 9260-8i controller, or
■ RAID 0 and 1 support for up to 8 SAS or SATA drives with the optional LSI MegaRAID 9240-8I RAID controller.
There is a dedicated SAS riser slot in the chassis for either RAID controller card.
There is also a location inside the chassis for the optional LSI RAID battery backup unit that can be used with the 9260-8i controller card.
|Internal storage devices
Up to 12 SFF 2.5” SAS or SATA hard disk drives (HDDs) or solid state drives (SSDs).
UCS Storage Accelerators are also available. These PCIe flash storage devices provide independent high-speed storage.
The server CIMC chip includes a Matrox G200 core. The first 8 MB of memory are allocated to the video core.
■ 1280 x 1024 resolution
■ 32-bit color depth
■ 8 MB video memory
■ Rear panel
• Two 10/100 dedicated management Ethernet ports
• Two 1-Gigabit ports (10/100/1000 Mbps capable). These integrated Gigabit ports support the Wake on LAN (WoL) and TCP/IP Offload Engine (TOE) standards
• Two 10-Gigabit Base-T Ethernet ports
• Two 10-Gigabit SFP+ Ethernet ports
• One RS232 serial connector
• One 15-pin VGA connector
• Two USB 2.0 connectors
■ Front panel
• One 15-pin VGA connector
• Three USB 2.0 connectors
■ Either 2 or 4 850 W power supplies
■ Power supplies are hot-swappable, rear-accessible, and redundant as 2+2 or 3+1
■ 8 fans, hot-swappable
■ Each of the 4 power supplies is equipped with a fan.
|Integrated management processor
The built-in Cisco Integrated Management Controller (CIMC) GUI or CLIinterface enables you to monitor the server inventory, health, and system event logs